Macros
#define	__HAL_GPT_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_GPT_STATE_RESET)
	Reset TIM handle state. More...

#define	__HAL_GPT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1\|=(GPT_CR1_CEN))
	Enable the TIM peripheral. More...

#define	__HAL_GPT_IS_ENABLED(__INSTANCE__) ((__INSTANCE__)->CR1 & (GPT_CR1_CEN))

#define	__HAL_GPT_MOE_ENABLE(__HANDLE__)
	Enable the TIM main Output. More...

#define	__HAL_GPT_DISABLE(__HANDLE__)
	Disable the TIM peripheral. More...

#define	__HAL_GPT_MOE_DISABLE(__HANDLE__)
	Disable the TIM main Output. More...

#define	__HAL_GPT_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(GPT_BDTR_MOE)
	Disable the TIM main Output. More...

#define	__HAL_GPT_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER \|= (__INTERRUPT__))
	Enable the specified TIM interrupt. More...

#define	__HAL_GPT_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
	Disable the specified TIM interrupt. More...

#define	__HAL_GPT_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER \|= (__DMA__))
	Enable the specified DMA request. More...

#define	__HAL_GPT_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
	Disable the specified DMA request. More...

#define	__HAL_GPT_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
	Check whether the specified TIM interrupt flag is set or not. More...

#define	__HAL_GPT_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
	Clear the specified TIM interrupt flag. More...

#define	__HAL_GPT_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
	Check whether the specified TIM interrupt source is enabled or not. More...

#define	__HAL_GPT_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
	Clear the TIM interrupt pending bits. More...

#define	__HAL_GPT_IS_GPT_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(GPT_CR1_DIR)) == (GPT_CR1_DIR))

#define	__HAL_GPT_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
	Set the TIM Prescaler on runtime. More...

#define	__HAL_GPT_SET_MODE(__HANDLE__, __MODE__) (__MODE__?((__HANDLE__)->Instance->CR1\|=__MODE__):((__HANDLE__)->Instance->CR1&=~GPT_OPMODE_SINGLE))
	Set the TIM single mode. More...

#define	GPT_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__)

#define	GPT_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__)

#define	GPT_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__)

#define	GPT_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__)

#define	__HAL_GPT_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) ((__IO uint32_t )(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2U)) = (__COMPARE__))
	Sets the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. More...

#define	__HAL_GPT_GET_COMPARE(__HANDLE__, __CHANNEL__) ((__IO uint32_t )(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2U)))
	Gets the TIM Capture Compare Register value on runtime. More...

#define	__HAL_GPT_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
	Sets the TIM Counter Register value on runtime. More...

#define	__HAL_GPT_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)
	Gets the TIM Counter Register value on runtime. More...

#define	__HAL_GPT_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__)
	Sets the TIM Autoreload Register value on runtime without calling another time any Init function. More...

#define	__HAL_GPT_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)
	Gets the TIM Autoreload Register value on runtime. More...

#define	__HAL_GPT_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__)
	Sets the TIM Input Capture prescaler on runtime without calling another time HAL_GPT_IC_ConfigChannel() function. More...

#define	__HAL_GPT_GET_ICPRESCALER(__HANDLE__, __CHANNEL__)
	Get the TIM Input Capture prescaler on runtime. More...

#define	__HAL_GPT_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1\|= (GPT_CR1_URS))
	Set the Update Request Source (URS) bit of the TIMx_CR1 register. More...

#define	__HAL_GPT_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~(GPT_CR1_URS))
	Reset the Update Request Source (URS) bit of the TIMx_CR1 register. More...

#define	__HAL_GPT_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__)
	Sets the TIM Capture x input polarity on runtime. More...

Detailed Description

Macro Definition Documentation

◆ __HAL_GPT_CLEAR_FLAG

#define __HAL_GPT_CLEAR_FLAG	(	__HANDLE__,
		__FLAG__
	)	((__HANDLE__)->Instance->SR = ~(__FLAG__))

Clear the specified TIM interrupt flag.

Parameters

__HANDLE__ specifies the TIM Handle.

__FLAG__

specifies the TIM interrupt flag to clear. This parameter can be one of the following values:

GPT_FLAG_UPDATE: Update interrupt flag
GPT_FLAG_CC1: Capture/Compare 1 interrupt flag
GPT_FLAG_CC2: Capture/Compare 2 interrupt flag
GPT_FLAG_CC3: Capture/Compare 3 interrupt flag
GPT_FLAG_CC4: Capture/Compare 4 interrupt flag
GPT_FLAG_CC5: Compare 5 interrupt flag
GPT_FLAG_CC6: Compare 6 interrupt flag
GPT_FLAG_COM: Commutation interrupt flag
GPT_FLAG_TRIGGER: Trigger interrupt flag
GPT_FLAG_BREAK: Break interrupt flag
GPT_FLAG_BREAK2: Break 2 interrupt flag
GPT_FLAG_SYSTEM_BREAK: System Break interrupt flag
GPT_FLAG_CC1OF: Capture/Compare 1 overcapture flag
GPT_FLAG_CC2OF: Capture/Compare 2 overcapture flag
GPT_FLAG_CC3OF: Capture/Compare 3 overcapture flag
GPT_FLAG_CC4OF: Capture/Compare 4 overcapture flag

Return values

The	new state of FLAG (TRUE or FALSE).

◆ __HAL_GPT_CLEAR_IT

#define __HAL_GPT_CLEAR_IT	(	__HANDLE__,
		__INTERRUPT__
	)	((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))

Clear the TIM interrupt pending bits.

Parameters

__HANDLE__	TIM handle
__INTERRUPT__	specifies the interrupt pending bit to clear. This parameter can be one of the following values: GPT_IT_UPDATE: Update interrupt GPT_IT_CC1: Capture/Compare 1 interrupt GPT_IT_CC2: Capture/Compare 2 interrupt GPT_IT_CC3: Capture/Compare 3 interrupt GPT_IT_CC4: Capture/Compare 4 interrupt GPT_IT_COM: Commutation interrupt GPT_IT_TRIGGER: Trigger interrupt GPT_IT_BREAK: Break interrupt

Return values

None

◆ __HAL_GPT_DISABLE

#define __HAL_GPT_DISABLE ( __HANDLE__ )

Value:

                        do { \
                          if (((__HANDLE__)->Instance->CCER & GPT_CCER_CCxE_MASK) == 0U) \
                          { \
                            if(((__HANDLE__)->Instance->CCER & GPT_CCER_CCxNE_MASK) == 0U) \
                            { \
                              (__HANDLE__)->Instance->CR1 &= ~(GPT_CR1_CEN); \
                            } \
                          } \
                        } while(0U)

Disable the TIM peripheral.

Parameters

__HANDLE__ TIM handle

Return values

None

◆ __HAL_GPT_DISABLE_DMA

#define __HAL_GPT_DISABLE_DMA	(	__HANDLE__,
		__DMA__
	)	((__HANDLE__)->Instance->DIER &= ~(__DMA__))

Disable the specified DMA request.

Parameters

__HANDLE__	specifies the TIM Handle.
__DMA__	specifies the TIM DMA request to disable. This parameter can be one of the following values: GPT_DMA_UPDATE: Update DMA request GPT_DMA_CC1: Capture/Compare 1 DMA request GPT_DMA_CC2: Capture/Compare 2 DMA request GPT_DMA_CC3: Capture/Compare 3 DMA request GPT_DMA_CC4: Capture/Compare 4 DMA request GPT_DMA_COM: Commutation DMA request GPT_DMA_TRIGGER: Trigger DMA request

Return values

None

◆ __HAL_GPT_DISABLE_IT

#define __HAL_GPT_DISABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)	((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))

Disable the specified TIM interrupt.

Parameters

__HANDLE__	specifies the TIM Handle.
__INTERRUPT__	specifies the TIM interrupt source to disable. This parameter can be one of the following values: GPT_IT_UPDATE: Update interrupt GPT_IT_CC1: Capture/Compare 1 interrupt GPT_IT_CC2: Capture/Compare 2 interrupt GPT_IT_CC3: Capture/Compare 3 interrupt GPT_IT_CC4: Capture/Compare 4 interrupt GPT_IT_COM: Commutation interrupt GPT_IT_TRIGGER: Trigger interrupt GPT_IT_BREAK: Break interrupt

Return values

None

◆ __HAL_GPT_ENABLE

#define __HAL_GPT_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR1|=(GPT_CR1_CEN))

Enable the TIM peripheral.

Parameters

__HANDLE__ TIM handle

Return values

None

◆ __HAL_GPT_ENABLE_DMA

#define __HAL_GPT_ENABLE_DMA	(	__HANDLE__,
		__DMA__
	)	((__HANDLE__)->Instance->DIER \|= (__DMA__))

Enable the specified DMA request.

Parameters

__HANDLE__	specifies the TIM Handle.
__DMA__	specifies the TIM DMA request to enable. This parameter can be one of the following values: GPT_DMA_UPDATE: Update DMA request GPT_DMA_CC1: Capture/Compare 1 DMA request GPT_DMA_CC2: Capture/Compare 2 DMA request GPT_DMA_CC3: Capture/Compare 3 DMA request GPT_DMA_CC4: Capture/Compare 4 DMA request GPT_DMA_COM: Commutation DMA request GPT_DMA_TRIGGER: Trigger DMA request

Return values

None

◆ __HAL_GPT_ENABLE_IT

#define __HAL_GPT_ENABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)	((__HANDLE__)->Instance->DIER \|= (__INTERRUPT__))

Enable the specified TIM interrupt.

Parameters

__HANDLE__	specifies the TIM Handle.
__INTERRUPT__	specifies the TIM interrupt source to enable. This parameter can be one of the following values: GPT_IT_UPDATE: Update interrupt GPT_IT_CC1: Capture/Compare 1 interrupt GPT_IT_CC2: Capture/Compare 2 interrupt GPT_IT_CC3: Capture/Compare 3 interrupt GPT_IT_CC4: Capture/Compare 4 interrupt GPT_IT_COM: Commutation interrupt GPT_IT_TRIGGER: Trigger interrupt GPT_IT_BREAK: Break interrupt

Return values

None

◆ __HAL_GPT_GET_AUTORELOAD

#define __HAL_GPT_GET_AUTORELOAD ( __HANDLE__ ) ((__HANDLE__)->Instance->ARR)

Gets the TIM Autoreload Register value on runtime.

Parameters

__HANDLE__ TIM handle.

Return values

16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR)

◆ __HAL_GPT_GET_COMPARE

#define __HAL_GPT_GET_COMPARE	(	__HANDLE__,
		__CHANNEL__
	)	((__IO uint32_t )(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2U)))

Gets the TIM Capture Compare Register value on runtime.

Parameters

__HANDLE__ TIM handle.

__CHANNEL__

TIM Channel associated with the capture compare register This parameter can be one of the following values:

GPT_CHANNEL_1: get capture/compare 1 register value
GPT_CHANNEL_2: get capture/compare 2 register value
GPT_CHANNEL_3: get capture/compare 3 register value
GPT_CHANNEL_4: get capture/compare 4 register value
GPT_CHANNEL_5: get capture/compare 5 register value
GPT_CHANNEL_6: get capture/compare 6 register value

Return values

16-bit or 32-bit value of the capture/compare register (TIMx_CCRy)

◆ __HAL_GPT_GET_COUNTER

#define __HAL_GPT_GET_COUNTER ( __HANDLE__ ) ((__HANDLE__)->Instance->CNT)

Gets the TIM Counter Register value on runtime.

Parameters

__HANDLE__ TIM handle.

Return values

16-bit or 32-bit value of the timer counter register (TIMx_CNT)

◆ __HAL_GPT_GET_FLAG

#define __HAL_GPT_GET_FLAG	(	__HANDLE__,
		__FLAG__
	)	(((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))

Check whether the specified TIM interrupt flag is set or not.

Parameters

__HANDLE__ specifies the TIM Handle.

__FLAG__

specifies the TIM interrupt flag to check. This parameter can be one of the following values:

GPT_FLAG_UPDATE: Update interrupt flag
GPT_FLAG_CC1: Capture/Compare 1 interrupt flag
GPT_FLAG_CC2: Capture/Compare 2 interrupt flag
GPT_FLAG_CC3: Capture/Compare 3 interrupt flag
GPT_FLAG_CC4: Capture/Compare 4 interrupt flag
GPT_FLAG_CC5: Compare 5 interrupt flag
GPT_FLAG_CC6: Compare 6 interrupt flag
GPT_FLAG_COM: Commutation interrupt flag
GPT_FLAG_TRIGGER: Trigger interrupt flag
GPT_FLAG_BREAK: Break interrupt flag
GPT_FLAG_BREAK2: Break 2 interrupt flag
GPT_FLAG_SYSTEM_BREAK: System Break interrupt flag
GPT_FLAG_CC1OF: Capture/Compare 1 overcapture flag
GPT_FLAG_CC2OF: Capture/Compare 2 overcapture flag
GPT_FLAG_CC3OF: Capture/Compare 3 overcapture flag
GPT_FLAG_CC4OF: Capture/Compare 4 overcapture flag

Return values

The	new state of FLAG (TRUE or FALSE).

◆ __HAL_GPT_GET_ICPRESCALER

#define __HAL_GPT_GET_ICPRESCALER	(	__HANDLE__,
		__CHANNEL__
	)

Value:

  (((__CHANNEL__) == GPT_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & GPT_CCMR1_IC1PSC) :\
   ((__CHANNEL__) == GPT_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & GPT_CCMR1_IC2PSC) >> 8U) :\
   ((__CHANNEL__) == GPT_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & GPT_CCMR2_IC3PSC) :\
   (((__HANDLE__)->Instance->CCMR2 & GPT_CCMR2_IC4PSC)) >> 8U)

Get the TIM Input Capture prescaler on runtime.

Parameters

__HANDLE__	TIM handle.
__CHANNEL__	TIM Channels to be configured. This parameter can be one of the following values: GPT_CHANNEL_1: get input capture 1 prescaler value GPT_CHANNEL_2: get input capture 2 prescaler value GPT_CHANNEL_3: get input capture 3 prescaler value GPT_CHANNEL_4: get input capture 4 prescaler value

Return values

The	input capture prescaler can be one of the following values: GPT_ICPSC_DIV1: no prescaler GPT_ICPSC_DIV2: capture is done once every 2 events GPT_ICPSC_DIV4: capture is done once every 4 events GPT_ICPSC_DIV8: capture is done once every 8 events

◆ __HAL_GPT_GET_IT_SOURCE

#define __HAL_GPT_GET_IT_SOURCE	(	__HANDLE__,
		__INTERRUPT__
	)	((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)

Check whether the specified TIM interrupt source is enabled or not.

Parameters

__HANDLE__	TIM handle
__INTERRUPT__	specifies the TIM interrupt source to check. This parameter can be one of the following values: GPT_IT_UPDATE: Update interrupt GPT_IT_CC1: Capture/Compare 1 interrupt GPT_IT_CC2: Capture/Compare 2 interrupt GPT_IT_CC3: Capture/Compare 3 interrupt GPT_IT_CC4: Capture/Compare 4 interrupt GPT_IT_COM: Commutation interrupt GPT_IT_TRIGGER: Trigger interrupt GPT_IT_BREAK: Break interrupt

Return values

The	state of GPT_IT (SET or RESET).

◆ __HAL_GPT_IS_GPT_COUNTING_DOWN

#define __HAL_GPT_IS_GPT_COUNTING_DOWN ( __HANDLE__ ) (((__HANDLE__)->Instance->CR1 &(GPT_CR1_DIR)) == (GPT_CR1_DIR))

@brief  Indicates whether or not the TIM Counter is used as downcounter.
@param  \__HANDLE__ TIM handle.
@retval False (Counter used as upcounter) or True (Counter used as downcounter)
@note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder

mode.

◆ __HAL_GPT_MOE_DISABLE

#define __HAL_GPT_MOE_DISABLE ( __HANDLE__ )

Disable the TIM main Output.

Parameters

__HANDLE__ TIM handle

Return values

None

◆ __HAL_GPT_MOE_DISABLE_UNCONDITIONALLY

#define __HAL_GPT_MOE_DISABLE_UNCONDITIONALLY ( __HANDLE__ ) (__HANDLE__)->Instance->BDTR &= ~(GPT_BDTR_MOE)

Disable the TIM main Output.

Parameters

__HANDLE__ TIM handle

Return values

None

Note: The Main Output Enable of a timer instance is disabled unconditionally

◆ __HAL_GPT_MOE_ENABLE

#define __HAL_GPT_MOE_ENABLE ( __HANDLE__ )

Enable the TIM main Output.

Parameters

__HANDLE__ TIM handle

Return values

None

◆ __HAL_GPT_RESET_HANDLE_STATE

#define __HAL_GPT_RESET_HANDLE_STATE ( __HANDLE__ ) ((__HANDLE__)->State = HAL_GPT_STATE_RESET)

Reset TIM handle state.

Parameters

__HANDLE__ TIM handle

Return values

None

◆ __HAL_GPT_SET_AUTORELOAD

#define __HAL_GPT_SET_AUTORELOAD	(	__HANDLE__,
		__AUTORELOAD__
	)

Value:

                        do{                                                  \
                            (__HANDLE__)->Instance->ARR = (__AUTORELOAD__);  \
                            (__HANDLE__)->Init.Period = (__AUTORELOAD__);    \
                          } while(0U)

Sets the TIM Autoreload Register value on runtime without calling another time any Init function.

Parameters

__HANDLE__	TIM handle.
__AUTORELOAD__	specifies the Counter register new value.

Return values

None

◆ __HAL_GPT_SET_CAPTUREPOLARITY

#define __HAL_GPT_SET_CAPTUREPOLARITY	(	__HANDLE__,
		__CHANNEL__,
		__POLARITY__
	)

Value:

                       do{                                                                            \
                           GPT_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__));               \
                           GPT_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
                         }while(0U)

Sets the TIM Capture x input polarity on runtime.

Parameters

__HANDLE__	TIM handle.
__CHANNEL__	TIM Channels to be configured. This parameter can be one of the following values: GPT_CHANNEL_1: TIM Channel 1 selected GPT_CHANNEL_2: TIM Channel 2 selected GPT_CHANNEL_3: TIM Channel 3 selected GPT_CHANNEL_4: TIM Channel 4 selected
__POLARITY__	Polarity for TIx source GPT_INPUTCHANNELPOLARITY_RISING: Rising Edge GPT_INPUTCHANNELPOLARITY_FALLING: Falling Edge GPT_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge

Note: The polarity GPT_INPUTCHANNELPOLARITY_BOTHEDGE is not authorized for TIM Channel 4.

Return values

None

◆ __HAL_GPT_SET_COMPARE

#define __HAL_GPT_SET_COMPARE	(	__HANDLE__,
		__CHANNEL__,
		__COMPARE__
	)	((__IO uint32_t )(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2U)) = (__COMPARE__))

Sets the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function.

Parameters

__HANDLE__	TIM handle.
__CHANNEL__	TIM Channels to be configured. This parameter can be one of the following values: GPT_CHANNEL_1: TIM Channel 1 selected GPT_CHANNEL_2: TIM Channel 2 selected GPT_CHANNEL_3: TIM Channel 3 selected GPT_CHANNEL_4: TIM Channel 4 selected
__COMPARE__	specifies the Capture Compare register new value.

Return values

None

◆ __HAL_GPT_SET_COUNTER

#define __HAL_GPT_SET_COUNTER	(	__HANDLE__,
		__COUNTER__
	)	((__HANDLE__)->Instance->CNT = (__COUNTER__))

Sets the TIM Counter Register value on runtime.

Parameters

__HANDLE__	TIM handle.
__COUNTER__	specifies the Counter register new value.

Return values

None

◆ __HAL_GPT_SET_ICPRESCALER

#define __HAL_GPT_SET_ICPRESCALER	(	__HANDLE__,
		__CHANNEL__,
		__ICPSC__
	)

Value:

                        do{                                                    \
                              GPT_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__));  \
                              GPT_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
                          } while(0U)

Sets the TIM Input Capture prescaler on runtime without calling another time HAL_GPT_IC_ConfigChannel() function.

Parameters

__HANDLE__	TIM handle.
__CHANNEL__	TIM Channels to be configured. This parameter can be one of the following values: GPT_CHANNEL_1: TIM Channel 1 selected GPT_CHANNEL_2: TIM Channel 2 selected GPT_CHANNEL_3: TIM Channel 3 selected GPT_CHANNEL_4: TIM Channel 4 selected
__ICPSC__	specifies the Input Capture4 prescaler new value. This parameter can be one of the following values: GPT_ICPSC_DIV1: no prescaler GPT_ICPSC_DIV2: capture is done once every 2 events GPT_ICPSC_DIV4: capture is done once every 4 events GPT_ICPSC_DIV8: capture is done once every 8 events

Return values

None

◆ __HAL_GPT_SET_MODE

#define __HAL_GPT_SET_MODE	(	__HANDLE__,
		__MODE__
	)	(__MODE__?((__HANDLE__)->Instance->CR1\|=__MODE__):((__HANDLE__)->Instance->CR1&=~GPT_OPMODE_SINGLE))

Set the TIM single mode.

Parameters

__HANDLE__	TIM handle.
__MODE__	GPT_OPMODE_REPETITIVE:REPETITIVE, GPT_OPMODE_SINGLE:One pulse.

Return values

None

◆ __HAL_GPT_SET_PRESCALER

#define __HAL_GPT_SET_PRESCALER	(	__HANDLE__,
		__PRESC__
	)	((__HANDLE__)->Instance->PSC = (__PRESC__))

Set the TIM Prescaler on runtime.

Parameters

__HANDLE__	TIM handle.
__PRESC__	specifies the Prescaler new value.

Return values

None

◆ __HAL_GPT_URS_DISABLE

#define __HAL_GPT_URS_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR1&=~(GPT_CR1_URS))

Reset the Update Request Source (URS) bit of the TIMx_CR1 register.

Parameters

__HANDLE__ TIM handle.

Note: When the USR bit of the TIMx_CR1 register is reset, any of the following events generate an update interrupt or DMA request (if enabled): _ Counter overflow/underflow _ Setting the UG bit _ Update generation through the slave mode controller

Return values

None

◆ __HAL_GPT_URS_ENABLE

#define __HAL_GPT_URS_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR1|= (GPT_CR1_URS))

Set the Update Request Source (URS) bit of the TIMx_CR1 register.

Parameters

__HANDLE__ TIM handle.

Note: When the USR bit of the TIMx_CR1 register is set, only counter overflow/underflow generates an update interrupt or DMA request (if enabled)

Return values

None

◆ GPT_RESET_CAPTUREPOLARITY

#define GPT_RESET_CAPTUREPOLARITY	(	__HANDLE__,
		__CHANNEL__
	)

Value:

(((__CHANNEL__) == GPT_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(GPT_CCER_CC1P | GPT_CCER_CC1NP)) :\
 ((__CHANNEL__) == GPT_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(GPT_CCER_CC2P | GPT_CCER_CC2NP)) :\
 ((__CHANNEL__) == GPT_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(GPT_CCER_CC3P | GPT_CCER_CC3NP)) :\
 ((__HANDLE__)->Instance->CCER &= (uint16_t)~GPT_CCER_CC4P))

◆ GPT_RESET_ICPRESCALERVALUE

#define GPT_RESET_ICPRESCALERVALUE	(	__HANDLE__,
		__CHANNEL__
	)

Value:

(((__CHANNEL__) == GPT_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~GPT_CCMR1_IC1PSC) :\
 ((__CHANNEL__) == GPT_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~GPT_CCMR1_IC2PSC) :\
 ((__CHANNEL__) == GPT_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~GPT_CCMR2_IC3PSC) :\
 ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~GPT_CCMR2_IC4PSC))

◆ GPT_SET_CAPTUREPOLARITY

#define GPT_SET_CAPTUREPOLARITY	(	__HANDLE__,
		__CHANNEL__,
		__POLARITY__
	)

Value:

(((__CHANNEL__) == GPT_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
 ((__CHANNEL__) == GPT_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\
 ((__CHANNEL__) == GPT_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\
 ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U) & GPT_CCER_CC4P)))

◆ GPT_SET_ICPRESCALERVALUE

#define GPT_SET_ICPRESCALERVALUE	(	__HANDLE__,
		__CHANNEL__,
		__ICPSC__
	)

Value:

(((__CHANNEL__) == GPT_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
 ((__CHANNEL__) == GPT_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\
 ((__CHANNEL__) == GPT_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
 ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U)))

Macros

Detailed Description

Macro Definition Documentation

◆ __HAL_GPT_CLEAR_FLAG

◆ __HAL_GPT_CLEAR_IT

◆ __HAL_GPT_DISABLE

◆ __HAL_GPT_DISABLE_DMA

◆ __HAL_GPT_DISABLE_IT

◆ __HAL_GPT_ENABLE

◆ __HAL_GPT_ENABLE_DMA

◆ __HAL_GPT_ENABLE_IT

◆ __HAL_GPT_GET_AUTORELOAD

◆ __HAL_GPT_GET_COMPARE

◆ __HAL_GPT_GET_COUNTER

◆ __HAL_GPT_GET_FLAG

◆ __HAL_GPT_GET_ICPRESCALER

◆ __HAL_GPT_GET_IT_SOURCE

◆ __HAL_GPT_IS_GPT_COUNTING_DOWN

◆ __HAL_GPT_MOE_DISABLE

◆ __HAL_GPT_MOE_DISABLE_UNCONDITIONALLY

◆ __HAL_GPT_MOE_ENABLE

◆ __HAL_GPT_RESET_HANDLE_STATE

◆ __HAL_GPT_SET_AUTORELOAD

◆ __HAL_GPT_SET_CAPTUREPOLARITY

◆ __HAL_GPT_SET_COMPARE

◆ __HAL_GPT_SET_COUNTER

◆ __HAL_GPT_SET_ICPRESCALER

◆ __HAL_GPT_SET_MODE

◆ __HAL_GPT_SET_PRESCALER

◆ __HAL_GPT_URS_DISABLE

◆ __HAL_GPT_URS_ENABLE

◆ GPT_RESET_CAPTUREPOLARITY

◆ GPT_RESET_ICPRESCALERVALUE

◆ GPT_SET_CAPTUREPOLARITY

◆ GPT_SET_ICPRESCALERVALUE